INDX Upgrade Hardware Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nut and bolt organizer to hold the hardware reused from the Core One and the new hardware provided in the kit.
- Rating
- 5 / 5
- Likes
- 113
- Downloads
- 556
- Makes
- 24
- Views
- 2,523
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I wasn't able to use the highly regarded screw organizers for the core one when I built mine, and looked for something similar for the INDX upgrade. I noticed there are two separate models (one for INDX kit hardware @wubbr, and one for the hardware you keep while disassembling your Core One @M3ro_2382879 ), but I wanted a combined version that could be printed all at once. It's not perfect, but it should do the trick. It has curved edges to reduce the corners lifting during printing, and a nice fillet in each compartment to help scooping out the parts with gummy bear fingers.
Note that I have yet to perform my INDX upgrade, so this model is based off of the sizing and hardware listed from the models I linked for remixing. I have uploaded a STL, 3MF, and OBJ files so please, take and make edits as you see fit.
This model has unique slots for each type of hardware used and keeps new / used hardware separate as well.
My Print Settings:
Nozzle: 0.4mm
Layer Height: 0.2mm
Profile: 0.2 Balanced
Filament: Polymaker Matte PLA (Army Dark Green) and Overture Matte Black
15% infill