1 / 3
Cheapino v2 Encoder Knob (Flush-Fit) — zdjęcie 1
1 / 3

Cheapino v2 Encoder Knob (Flush-Fit)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 16x18mm rotary knob specifically designed to sit flat against the Cheapino v2 keyboard with minimal clearance.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Standard encoder knobs sit too high on the Cheapino v2, so I designed this specifically for my build. This custom knob fixes that with a deep inner cavity, resulting in a clean, flush fit.

Key Details
  • Dimensions: 16mm (Height) x 18mm (Diameter)

  • Hardware: Fits 15mm EC11 Encoders

  • Versions: Includes files for both D-Shaft and Round/Knurled shafts.

Print Settings
  • Layer Height: 0.16mm or 0.2mm

  • Orientation: Print top-face down

  • Supports: None required

  • Fit Tip: If the shaft fit is slightly tight or loose, simply scale the X and Y axes by +/- 1% in your slicer. I have also included the STEP and native Fusion 360 (.f3d) source files so you can easily edit the tolerances to your exact needs!

Tagi