Double Edge Safety Razor Blade Box Dispenser and Blade Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
6,32 € – 7,72 € netto (bez VAT)
Dla pliku: Double Edge Safety Razor Blade Box Dispenser and Blade Holder_0.4n_0.2mm_PLA_MK4S_5h14m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 7,02 € netto (środek widełek).
- Masa podana przez autora
- 125 g
- Czas druku podany przez autora
- 5,24 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Wall mounted razor box dispenser with side pockets that can fit up to 20 boxes of 5, with 2 side pockets to hold blades.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After a request from my close friend whom works as a barber, they requested a box dispenser to bring a bit more order to their workflow. Please note, check the model viewer first, as I have made minor distance changes to the counterbore holes to make room for the Command Strip divot as opposed to some of the pictures.
Features
Holds 20 boxes of 5 for double edge razor blades.
2 side pockets capable of holding 1 box of 5, or the blades from an open box.
Large open front area to see how many boxes remain and for easy loading from the top.
Counterbore holes as well as divot on back provide availability to mount this with either wall anchors or Command Strips (adhesive or Velcro).
Only able to remove one box at a time from the bottom slit with ease at an ergonomic angle.
Box Mounting
2 counterbore holes for wall mounting (8.5mm head diameter, 3mm head depth, 4.5mm diameter thread hole).
Large rectangular divot on back capable of filling up to XL Command Strips. This will sit more flush with the wall using the adhesive over the Velcro.
185mm x 72 mm x 40mm in dimension.
Printing
Material: PLA
Nozzle: 0.40 mm
First Layer: 0.20 mm
Perimeters: 3
Infill: 15%
Pattern: Gyroid
Fuzzy Skin: Yes, All Walls, 0.05mm thickness, 0.4mm distance
Minimum Layer Time: 15 Seconds (To help counter overhang curls)
Supports: None (Manual supports and brim included.)
Orientation: Have brims flat to the build plate.
Post Processing: Yes (Recommend snips and deburring tool)