1 / 5
Double Edge Safety Razor Blade Box Dispenser and Blade Holder — image 1
1 / 5

Double Edge Safety Razor Blade Box Dispenser and Blade Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wall mounted razor box dispenser with side pockets that can fit up to 20 boxes of 5, with 2 side pockets to hold blades.

Rating
0 / 5
Likes
3
Downloads
12
Makes
0
Views
134
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

After a request from my close friend whom works as a barber, they requested a box dispenser to bring a bit more order to their workflow. Please note, check the model viewer first, as I have made minor distance changes to the counterbore holes to make room for the Command Strip divot as opposed to some of the pictures.

Features

  • Holds 20 boxes of 5 for double edge razor blades.

  • 2 side pockets capable of holding 1 box of 5, or the blades from an open box.

  • Large open front area to see how many boxes remain and for easy loading from the top.

  • Counterbore holes as well as divot on back provide availability to mount this with either wall anchors or Command Strips (adhesive or Velcro).

  • Only able to remove one box at a time from the bottom slit with ease at an ergonomic angle.

Box Mounting

  • 2 counterbore holes for wall mounting (8.5mm head diameter, 3mm head depth, 4.5mm diameter thread hole).

  • Large rectangular divot on back capable of filling up to XL Command Strips. This will sit more flush with the wall using the adhesive over the Velcro.

  • 185mm x 72 mm x 40mm in dimension.

Printing

  • Material: PLA

  • Nozzle: 0.40 mm

  • First Layer: 0.20 mm

  • Perimeters: 3

  • Infill: 15%

  • Pattern: Gyroid

  • Fuzzy Skin: Yes, All Walls, 0.05mm thickness, 0.4mm distance

  • Minimum Layer Time: 15 Seconds (To help counter overhang curls)

  • Supports: None (Manual supports and brim included.)

  • Orientation: Have brims flat to the build plate.

  • Post Processing: Yes (Recommend snips and deburring tool)

Tags