Counting matching models…
I needed a larger Container for my Senseo Coffee Pads because I mostly buy the 40 piece packs. This Container will exactly hold 40 Coffee Pads. i made 2 versions: one with a place to put a 'nametag' so you don't forget what Pads are in…
Double WaveShare 7.5" e-Paper case - symmetrical borders I am using my " WaveShare 7.5" e-Paper case - symmetrical borders " for 2 years in several projects now, but some of them just would look better in my eyes if they were in 1 display…
Love the original so please down the files from there. The only things I changed were the lid to accommodate two pipes instead of two and the filter box to fit between the two pipes. This was a very rough and fast remix. It's not perfect…
Drill guide that can be used at the ends of the 3060 profile. They allow you to drill holes with an 8 mm drill. You need to use a 10 mm tube. I used an aluminum tube. To attach, you need to use a small locksmith's clamp.
You need: 4 x screw or velcro tape. Good luck ;-)
Best printed with standard support, but also possible without supports, brim recommended to avoid warping.
A quick little design i whipped up for fun, wanted to see how well it would work when printed. A modification on my Pin Joint 3.0 Design. Same settings as before, printed solid with tree supports and such. Included also is the boolean…
Strain relief for both power and the thermocouple, rather than straining them all in one bundle.
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
It's a backscratcher with two settings - one side for gentle scratching, and one side for manly men who want to remove some skin. Comes in 3 different lengths for any size printer, but feel free to use the STEP to make your own. Can be…
Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This model is designed for cutting fondant then applying the double happiness symbol to the surface of a a wedding cake. The model is created from a black and white image. First the image is processed using InkScape to produce the file…
Our family and friends play a card game called “Screw Your Neighbor” (similar to Phase 10) that starts with 10 cards in your hand and can sometimes get where you're almost holding a whole deck in your hand. Because of this, we've had…
Wall mounting holes 5.5mm in diameter. Printed 0.2mm, PETG, 250C, no supports needed.
This extended magazine for Sillybutts' Battle Axe uses only 3 more drum springs to do double stacking and fit 12 shells, and works with or without my full-length MXL mod here . That means it's always fully compatible with all normal…
Lockwasher.. thing for the DAA Racer magholder (I don't actually know what the name of this item is called). Mine broke almost immediately, and replacements seems hard to find. Suggest printing in something quite sturdy. I used PETG-CF.…
I had to print this at 190 degrees Celsius, lower the printing speed and keep the door open to my printing enclosure. If I didn't, the corners on the smaller spiral would end up looking really bad. You might not have the same issues. Dry…
The first cup in a series of functional and personalized. It looks elegant and has a sturdy feel, depending on the filling.
This clip allows you to hold 2 beer bottles with a neck of 26mm Diameter and body diameter of 70 mm. Check the dimensions first before printing! Printing is best with 3 walls and 15% infill to preserve strength but enough flexibility with…
This ID Holder is double-sided and will fit standard IDs or card sizes. The model is recommended to be printed in PLA, PETG or ABS and does not require supports. I hope you enjoy the design and please comment if you have any issues or…
This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…
The proper adapter for this would be a Metra 99-7325S (or Metra 99-7325B), though I wanted to place my Din lower to reduce windshield glare at night and to reduce reach for volume control. I also enlarged the open slot holder so you can…
!!! This model is still in progress - I am adding new models/info !!! ------------------------------------------------------------------------------------- Background/What is it? In my leasure I like building simple cabinets, wardrobes,…
Easily store your EGO batteries out of the way and off the charger while not in use. For any modifications, here's a link to make a copy of my 3D geometry in Onshape If this helped you out, tips are welcome on PayPal or Venmo If you…
Playing Card Case made for double deck. Lid fits quiet well on the base. Inner space is 59x89x18mm. Enough space for various types of playing cards. Files with 19 at the end has inner height 19mm. For printing, I recommend 3 vertical…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Remixed Leaf 1 coaster to be double-sided. Printing without supports.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
This remix is intended for spools vertically stacked and aligned . Filament can be threaded through the back with minimal to no bends. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK…
For whom is this for? N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor. What to…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
Double spool holder two versions Double undertable spool holder spool dimensions spool diameter max 230mm hole diameter min 46mm hole length max 76mm First (no support version) Print settings: 0,2mm layer 8 walls 30% infill no supports…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
I created a parametric Picture Frame for Ikea Skadis Peghole Board. Download the attached Autodesk Fusion 360 file to adapt the model to your individual picture size. Parameters PicWidth : to change the width of the picture PicHeight : to…
Update 24/02/26: Corrected an issue with the bearing retainer threading and file names. This is a remix of nhchiu 's fantastic Switchwire Double Shear Motor Mounts redesigned to work with the Enderwire conversion. Other than the supplied…
Double length screw box divider. 54 W x 52 H x (79 x 2 )L mm, for long screws
This is a replacement for broken HO drawbars of Athearn or Walthers double-stack shipping container well cars.
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
Unleash maximum gnome-rage with the Double Flip-Off Gnome! This defiant little guy stands firm in his classic pointy cap, sturdy boots, and belt buckle, thrusting both middle fingers straight at the world—no apologies, no compromises. For…
This Infinity toy has small spikes. It stimulates the hands while playing and can be used like a massage ball. New: When the spikes are folded outwards, there are pairs of spikes on the inside that interlock, making the ball more stable…
It's just a double spinner — make sure the print bed is clean before starting the print. Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
Remixed for Combined Double Battery. Removed divider for batteries. Came out a bit loose but tightens up nicely when the case is closed.
✍ DOUBLE MARKER – Color While You Print Raise your hand if you’ve ever wanted to pigment PET strips on the fly. 🎨✋ Yeah, me too — so I built this. 💡 The DOUBLE MARKER lets you insert two chisel-tip markers (like the Snowman G-12T)…
Ultra Slim Ender 3 Y-Motor Bracket https://www.thingiverse.com/thing:5158277 Replacement end-stop mount https://www.printables.com/make/2724415 BOM 4x m3x30 instead of m3x20 1x 625ZZ bearing (Two can be salvaged from a v-wheel. Use a flat…
A double bowl riser I made for my dog, each hole has an ID of 148mm and raises the bowls 75mm (~3in) from the ground. The walls are 4mm thick. This is a large part, you'll need a build volume of at least 303mm^2, I designed this for and…
Protean front end (and pusher) remix for use with MisplacedMoose's double stack double feed magazines. The motor covers need to be redesigned to accommodate for the re-routed wires, but i got lazy. I'll probably do it later if somebody…
Sony double sided NP-F550 dummy for mounting things together (Like a monitor and a wireless reciever)
What? A Bike handlebar alignment tool that doesn't require hardware or tools or lasers - just hook it on the handlebars and go! The tool aligns on the handlebars and rests on the headtube. Slots in the gauge are sized for a variety of…
I needed a replacement bar clamp for my SRAM flat bar shifter, and wasn't happy with how much flex I was getting with a printed one. This replaces the standard bar clamp with one that mounts to both holes in the SRAM shifter, allowing for…
The Groove Life belts are great, but difficult to store because there is no clasp to loop around a hook. This is designed for a 15 X 2 mm magnet to be glued in the recess and hold the belt in place, just like the buckle itself when the…
"One size fits all” is a term that tends not to include me, especially when it comes to hats. If you're like me, which means that in addition to having an inhumanly large head you're getting tired of trying to find extenders amongst all…
This is a remix of sincsum’s Double Door Bar . My door knobs are spaced wider than the original model, so I increased the bar length by 20 mm . I also cleaned up some of the geometry slightly and included the STEP file so you can easily…
Bring the bustling atmosphere of a city street to your collection with this 3D printable STL model of a Double Decker Bus. This iconic city transport model is perfect for creating urban scenes, transport displays, or adding a classic…
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
Magnetic hook for for scraper (Core One) This is what I needed to hang an scraper :) I used two 12x2 magnets
Remix of the mounting bracket for the filament spool arm of the Qidi Plus 4. The Qidi Box uses this mounting point for the arm that holds the filament hub, requiring removal of the arm that holds the filament spool. This remix provides…
From my original Pill Box series, by request I have added a double pillbox version for AM and PM dosing that can either be magnetically attached or glued together. You'll need: 8 3x2 magnets, 6 8x3 magnets 2 m2 threaded inserts, 2 m2x4…
Replacement Door Pull for Brimnes Wardrobe doors. Double Bar style, open and closed ends. Print files with screw holes for the original wood screws or replacement 3mm hex head machine style screws. Holes 160mm apart. Print as pictured. No…
Just a Smuk3D brio compatible remix. I needed shorter versions. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20 % Notes: Printed in PLA with 4 perimeters and 4 top/bottom solid layers. Category:…
Bottle neck and cap are made with Steve DeGroof parametric cap/lid https://www.printables.com/model/216019-parametric-bottle-cap-jar-lid While the cap of the ‘big’ chamber is screwed on and the one of the small dosing chamber isn't,…
Pole mount for mounting my weather station. Fits an en-iso 10223 double rod mesh fence
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
![IKEA SKÅDIS PTFE Double Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1217861/images/9140018_3f0b859a-a727-47f2-9cc1-54fc78b8ad16_c6a52c84-e2fb-4002-95f9-0a532296c02a/20250305_210901jpg_compressed-photoroom.png)
