Dust Port Adapter - Ridgid R4331 13" Thickness Planer (4" Dust Collection)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round cone adapter that connects the Ridgid R4331 13-Inch Thickness Planer OEM dust port piece to a standard 4" pipe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Summary
Round-to-round cone adapter that connects the Ridgid R4331 13-Inch Thickness Planer OEM dust port piece to a standard 4" dust collection hose. Simple straight cone design — the OEM adapter slides into one end, your 4" flex hose slides into the other.
The Problem
The Ridgid R4331 planer's OEM dust port is a small ~63mm round piece that doesn't directly accept standard 4" dust collection hose. You either need an awkward combination of reducers and tape, or this single adapter that cleanly transitions between the two sizes.
Design Details
Simple cone reducer — straight taper from small to large, no elbows or bends
Small end: 63mm ID — the OEM planer dust port piece (63mm OD) slides directly inside
Large end: 100mm ID — standard 4" flexible dust collection hose slides inside
Both ends grip by friction — optionally secure with hose clamps
3mm wall thickness throughout for rigidity
Parametric source — adjust all dimensions in OpenSCAD if your measurements differ