Print in Place Rosary
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a print in place Rosary. With Jesus on the Cross.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Historical Context
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find the exact Rosary I wanted so I remixed a good design and made it how I wanted it. This Rosary is a remix with Jesus added to the cross and an SVG of Mary. This is a print in place and no support is needed. You can find more print information from the remix here.
I used PLA with PEI plate with .10mm fast Detail. Using Mk4 HF .4 nozzle. I would recommend using a .25 nozzle but I didn't want to wait too long for the print. If not using a PEI board I would recommend brim. PETG also works better but i would make sure its dry to reduce stringing. I left all the files so you can customize it yourself.