Print in Place Rosary
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of a print in place Rosary. With Jesus on the Cross.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 150
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Historical Context
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find the exact Rosary I wanted so I remixed a good design and made it how I wanted it. This Rosary is a remix with Jesus added to the cross and an SVG of Mary. This is a print in place and no support is needed. You can find more print information from the remix here.
I used PLA with PEI plate with .10mm fast Detail. Using Mk4 HF .4 nozzle. I would recommend using a .25 nozzle but I didn't want to wait too long for the print. If not using a PEI board I would recommend brim. PETG also works better but i would make sure its dry to reduce stringing. I left all the files so you can customize it yourself.