PRUSA MINI+ Z Axis Extra Height Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add an additional 5-10mm of print height (Z axis) with this little adaptor.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I was quite surprised how this was over looked, but its a super easy fix :D
No need to dismantle the Z top end or the Extruder assembly.
This little adaptor fits comfortably between the extruder and z axis mounts.
The issue is that the extruder fowls on the z axis top, this little adaptor moves the assembly away from the other, which in turn gives you more z axis height!
The real fix is to update the z axis top to remove the excess material, but that involves dismantling your entire z axis to incorporate the fix,
Additional hardware required,
Longer screws or
same screws and 10mm standoffs.
the adaptor accommodates for both
Can print in draft 0.25mm (standard settings)
0.4mm nozzle,
20% in fill
Printed in PLA+, can use PETG also to match
Results are super pretty see photos :D