INBXX - LDO Door Panel Hole jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and dirty 2-piece jig for drilling holes in the LDO door panels for the INBXX enclosures.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
INBXX by Voxel - there was an error in the hole locations on the LDO door panels early on. While this likely will be remediated for future builds, if you're a project OG, you can either use the off-set hinges, or you can print this 2-part jig.
Simply orient the door in place where you need to drill the new holes, clamp it tight and you'll be able to drill a properly located set of holes to use the same hinge on both spots in the door.
Once mounted, the only evidence is one of the originally off-spot holes peeks out below one of the hinges. Do it right and it's below the lower hinge and likely never seen :)
