Lotus Elise S2 Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball Mount that clips on to dashboard
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're fed up with phone mounts that fall off every Summer/Winter here's a solution. A standard 17mm ballmount that clips around the dashboard and is even held by an existing screw. This took a lot of time to design and I'm new to 3D printing and CAD so if you think it doesn't look professional, it's not.
Warning, this will very likely scratch the dashboard over time. If you can't live with that please find another solution.
I printed it in PETG to avoid issues with it getting warm if left in the sun. The central part needs to be very stiff to avoid your phone bouncing around and falling off (if using a magsafe mount like me). 4 wall loops is great, 2 was not enough.
I used a Bambu labs A1 0.16mm layer height, 15% cubic infill, tree supports. It takes about 3 hours and 38g filament.