Funsicle (Polygroup) Pool Skimmer Inlet Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PP-printed adapter fits real skimmer into Funsicle/Polygroup above-ground pool wall; leak-tested underwater. CC BY-NC-SA
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My dad bought a Funsicle pool. Funsicle is made by Polygroup. Polygroup is, at its core, one of the largest artificial Christmas tree manufacturers on the planet. The included skimmer reflects this heritage faithfully.
This adapter mounts through the Funsicle pool wall from the inside. The dome seats against the liner, the knurled collar locks it in place, and the hose barb on the other side connects to a real skimmer. The underwater photos are not a flex. They are proof of concept. It doesn't leak. His pool now has actual surface skimming.
Why PP?
Polypropylene is chemically inert to chlorinated water and pool chemicals, doesn't embrittle under UV the way PLA does, and won't dissolve into your dad's pool over a summer. It's the correct material. Full stop.
PP printing is a blood sport. Bed adhesion is genuinely hard, warping is real, and your first few attempts may go directly into the bin. I suggest PP. I will not be held responsible for your calluses. If you absolutely can't make PP work, ASA or PETG with a rubber gasket seal is an acceptable compromise. PLA in a chlorinated environment is not.