CR10V3 Spool Holder w/ Filament Sensor Mount. Similar to CR10 Smart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design of this spool holder is based off of the one on the new Creality CR-10 Smart Pro. The Holder combines the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 917
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The design of this spool holder is based off of the one on the new Creality CR-10 Smart Pro. The Holder combines the spool holder and the filament sensor mount in one.
Update 1/20/2022 - Per a request I made a second version that mounts on the rear of the upper crossbar to allow max z. I have not tested this mod. I included inventor file so it can be tweaked as needed. New version is CR10V3 SPOOL HANGER_v2.stl
The holder can use the stock CR10V3 spool peg, but I designed this with using the the following spool peg with bearings.
https://www.thingiverse.com/thing:3502973
Mounting the part to the CR10V3 is done by using the stock M4 Tee bolts and M4 Screw. I used M4 x 12mm or M4 x 16mm screws.
Filament sensor needs to be mounted using M3x20mm screws and m3 nuts on the back to secure the sensor.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
40
Filament: Inland PLA+ Any
Notes:
Additional Cura Settings:
Walls = 6Infill = 40%
Infill Type Cubic or Cubic Subdivsion
Category: 3D Printer Parts