CR10V3 Spool Holder w/ Filament Sensor Mount. Similar to CR10 Smart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The design of this spool holder is based off of the one on the new Creality CR-10 Smart Pro. The Holder combines the…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 84
- Makes
- 0
- Views
- 923
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The design of this spool holder is based off of the one on the new Creality CR-10 Smart Pro. The Holder combines the spool holder and the filament sensor mount in one.
Update 1/20/2022 - Per a request I made a second version that mounts on the rear of the upper crossbar to allow max z. I have not tested this mod. I included inventor file so it can be tweaked as needed. New version is CR10V3 SPOOL HANGER_v2.stl
The holder can use the stock CR10V3 spool peg, but I designed this with using the the following spool peg with bearings.
https://www.thingiverse.com/thing:3502973
Mounting the part to the CR10V3 is done by using the stock M4 Tee bolts and M4 Screw. I used M4 x 12mm or M4 x 16mm screws.
Filament sensor needs to be mounted using M3x20mm screws and m3 nuts on the back to secure the sensor.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
40
Filament: Inland PLA+ Any
Notes:
Additional Cura Settings:
Walls = 6Infill = 40%
Infill Type Cubic or Cubic Subdivsion
Category: 3D Printer Parts