Yealink Desk Phone T7 Series Universal Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A redesigned lower stand for Yealink T7 series desk phones.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yealink Desk Phone T7 Series Universal Stand
I designed this stand because Yealink's official "low" stand still holds the phone at a 40° angle, too steep for my liking. This version lowers the phone to a 30° angle, which sits much better on my desk.
It is originally designed for the T74U, but I made the design also work with the T73U and T77U.
It slides in like the original foot and is friction fit.
The stand can also be inserted upside down for a higher angle.
Print settings & orientation
Print on its side, with a small amount of support. This orientation gives the best strength at the locking tabs that slide into the phone body.
Dimensions: 14.5cm x 8cm
Printed and tested with:
Material: PLA+
Wall lines: 5
Infill: 15%
The result is extremely sturdy, I tried to snap it and couldn't.
Tip: Add a small strip of rubber or silicone tape to the bottom of the foot for extra grip on your desk surface.
Feel free to remix and adapt to your needs (included f3d file)!