Cubby TCG Drawer Catalog 2

Card Catalog 2 Electric Boogaloo!!

With over a year of using my previous Cubby TCG Drawer Catalog, I started feeling the pains of my previous design. Namely that my original design limited to only 8 drawers per Ikea Kallax cubby. I had outgrown that few drawers so it was back to the drawing board with some changes.

Features:

• A Standard-sized TCG card catalog unit with options to connect additional copies to create your own personal card catalog

• Connect 12 (in a 4 x 3 pattern) Cubby TCG Drawer Catalogs to fill a Ikea Kallax shelf cubby

• A dovetail rail prevents  drawers from twisting or sagging as the drawer is pulled out

• Drawers are full removable for transporting your cards around

Notes:

• Drawers fit Standard-sized TCG cards with or without outer sleeves

• Drawers will NOT fit Top Loaders, Deck Boxes, or Oversized cards

• Fits roughly 575 unsleeved cards

• Designs are a tight fit for the Catalog Connector Pins and Handle. They are friction fit to help disassemble if desired.

What you need:

• 1 x  Catalog print (or both p1 and p2 pre-cut prints)

• 1 x Drawer print (or both p1 and p2 pre-cut prints)

• 1 x Handle print

• (Optional) 5 x Pegs for Split Printing

• (Optional) Super Glue for Split Printing

• (Optional) Catalog Connector Pins

• (Optional) Card Dividers

Curious about what I changed?

• Removed the magnets to help closure. They were not as effective as I hoped during my initial design especially with fully loaded drawers.

• Increased the amount of drawers per Kallax cubby. Noticed a lot of wasted space in my original design out of concern for strength and accommodating a large dovetail.

• Gained some card storage space by making the back of the drawer the back wall of the catalog, also makes it easier to print and put the drawers back

• Stronger handle. I snapped a handle once and it was annoying to replace.