Aperture Science Raspberry Pi Case v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A raspberry pi case inspired by the PCs that can be found in the game portal
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 1454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is version 2 of my original case that got almost impossible to edit.
Update 2: Added a back panel for Raspberry pi 4 (mirrored ports)
Update: Modified dimensions for easier printing.
The case is designed after a computer you could find in the first game.
The case have spaces for three 30mm fans in the front of the case, and one 40mm fan on the side panel.
To reduce support material I have split it into multiple components, use your judgement to orient the pieces that have been designed to print in one direction. Most of the parts have been designed to print with the outside of the case towards the build plate.
Front and back panels are designed to be glued to the "case" part.
The side panel have small tabs to snap into, and rounded bottom edge to allow it to flip down.
Case is at this point untested, but I will upload pictures once I have it printed it.