Finial for Halloween Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finial used with 1/2" PVC electrical conduit for a fake Wrought Iron fence.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I created a fake wrought iron fence for my home halloween haunt using 1/2" gray electrical conduit and painted wood as the horizontal runners. It is about 5' tall and looks good as-is, but I've always wanted finials on each "iron" pipe to make it more believable. I designed these to fit inside the open end of the pipe so the model can be printed without supports and does not require glue. I printed in grey PETG (printed the prototype in the Gold Metallic PETG I happened to have loaded) and at this scale can get at least 120 out of a 1kg spool using 2 walls, no rafting/brimming, and 15% gyroid infill. I included the cad file which is based off a revolved sketch so you can make changes to the profile or size for different pipe sizes.
I can print 49 of them on a single plate on my Adventure 5M Pro and it takes just over 10 hours and about 350g of filament.