1 / 1
Finial for Halloween Fence — image 1

Finial for Halloween Fence

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Finial used with 1/2" PVC electrical conduit for a fake Wrought Iron fence.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
40
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution

I created a fake wrought iron fence for my home halloween haunt using 1/2" gray electrical conduit and painted wood as the horizontal runners. It is about 5' tall and looks good as-is, but I've always wanted finials on each "iron" pipe to make it more believable. I designed these to fit inside the open end of the pipe so the model can be printed without supports and does not require glue. I printed in grey PETG (printed the prototype in the Gold Metallic PETG I happened to have loaded) and at this scale can get at least 120 out of a 1kg spool using 2 walls, no rafting/brimming, and 15% gyroid infill. I included the cad file which is based off a revolved sketch so you can make changes to the profile or size for different pipe sizes.

I can print 49 of them on a single plate on my Adventure 5M Pro and it takes just over 10 hours and about 350g of filament. 

Tags