1 / 1
GT2 9mm Belt Tensioner for 23.5mm EMT Conduit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt tensioner for GT2 9 mm belt. Clips onto 23.5 mm (3/4" EMT) conduit, tensioned with a zip tie.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
GT2 9 mm Zip Tie Belt Tensioner — 23.5 mm Conduit
Clips onto a 23.5 mm conduit rail. The belt end drops into a retention slot at the end of the tensioner, and a zip tie through the body pulls it tight. No screws or other hardware required.
Specs
Belt: GT2, 9 mm
Fits 23.5 mm OD conduit (3/4" EMT)
Size: 31.75 × 30 × 50.4 mm
Hardware: one zip tie
Print settings
PLA, 40% infill, 0.2 mm layers
No supports
Print in the STL's orientation (saddle axis vertical)
