Under-desk trash can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A trash can that takes up no space, a handle that locks onto your tabletop. Customizable for any table and any trash can
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
No space on your desk? No problem
This trash can sits below your desk and takes minimal desk space.
Materials (for one trash can)
1 M3 square nut
1 M3x16 screw
Download instructions
- Four options for trash cans: 100x100 mm or 150x150 mm, pattern/no pattern
- I recommend 100x100 patterned, but if your printer vibrates a lot, I recommend using no pattern
- The medium-size mount should work for almost every single desk. If it doesn't, use the large
- Print one inner and one outer lock piece
Printing instructions
0.2 mm layer height
Orientations and supports as shown
10% infill
Assembly Instructions
- Insert the M3 square nut into the inner lock piece.
- Fit the inner and outer lock pieces into the mount.
- Loosely screw in the M3x16 screw.
- Place the mount on the table and raise the lock as high as it will go.
- Firmly clamp the top of the mount and the lock together (a cracking sound is fine, the mount top is angled at 86° for downward clamping force).
- While holding the clamp tight, fully tighten the screw.
- The mount should be securely fastened.