Weed Eater Barracuda Leaf Blower fan guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The hinge bracket on the bottom of the leaf blower that holds the flip-out fan guard so that the device can be used as…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The hinge bracket on the bottom of the leaf blower that holds the flip-out fan guard so that the device can be used as a leaf vac broke. Since the bracket is part of the main body housing, I couldn't just print a replacement for it, so I made a replacement fan guard that snaps into place.
The printed guard doesn't 100% match the uploaded STL. After I started the print, I decided to add an angle brace to the snap leaves to give it a little more strength. As it is, it's a bit of a loose fit, but I think it should stay in with regular usage. If it falls out, I'll update the model to have a larger diameter on the cylinders on the ends.
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
at least 20%
Notes:
I used 4 top & bottom layers, 4 perimeters.
You need some infill to give the flat surfaces something to lay on during printing.. 20% seemed to work on mine.Category: Replacement Parts