Weed Eater Barracuda Leaf Blower fan guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The hinge bracket on the bottom of the leaf blower that holds the flip-out fan guard so that the device can be used as…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
The hinge bracket on the bottom of the leaf blower that holds the flip-out fan guard so that the device can be used as a leaf vac broke. Since the bracket is part of the main body housing, I couldn't just print a replacement for it, so I made a replacement fan guard that snaps into place.
The printed guard doesn't 100% match the uploaded STL. After I started the print, I decided to add an angle brace to the snap leaves to give it a little more strength. As it is, it's a bit of a loose fit, but I think it should stay in with regular usage. If it falls out, I'll update the model to have a larger diameter on the cylinders on the ends.
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
at least 20%
Notes:
I used 4 top & bottom layers, 4 perimeters.
You need some infill to give the flat surfaces something to lay on during printing.. 20% seemed to work on mine.Category: Replacement Parts