1 / 4
Racebox micro case with 1100mah battery, charger — zdjęcie 1
1 / 4

Racebox micro case with 1100mah battery, charger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I was making a few boxes and this is my favorite one :D 1100mah, charger and switch

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hello everyone! I made this box for dyno purpose with PerfExpert app.

Materials:

- x2 Insert M3x4x4.5 (I can make mistake with insert outer diameter :D)
- x2 M3x6 screw
- Lipo Rider Plus
- Slider switch 0.5A 50V DC; ON-ON; 1C-2P
- Battery Li-Po Li-Poly 1100mAh 3.7V PCM 40x25x10mm 102540

I made connections like that:

- Battery + -> Lipo Rider bat
- Battery - -> Lipo Rider GND
- Slider center pin -> Lipo Rider EN
- Slider outer pin -> Lipo Rider GND
- Racebox + -> Lipo Rider 5v
- Racebox - -> Lipo Rider GND


You need to switch the switch on Lipo Rider to 5v.
You have to cut slider switch mounting plates to fit that in socket.
You have to unsolder USB-A and JST 2.0 from Lipo Rider.

I was printing this with fuzzy skin billow and also with supports

Tagi