Racebox micro case with 1100mah battery, charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was making a few boxes and this is my favorite one :D 1100mah, charger and switch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone! I made this box for dyno purpose with PerfExpert app.
Materials:
- x2 Insert M3x4x4.5 (I can make mistake with insert outer diameter :D)
- x2 M3x6 screw
- Lipo Rider Plus
- Slider switch 0.5A 50V DC; ON-ON; 1C-2P
- Battery Li-Po Li-Poly 1100mAh 3.7V PCM 40x25x10mm 102540
I made connections like that:
- Battery + -> Lipo Rider bat
- Battery - -> Lipo Rider GND
- Slider center pin -> Lipo Rider EN
- Slider outer pin -> Lipo Rider GND
- Racebox + -> Lipo Rider 5v
- Racebox - -> Lipo Rider GND
You need to switch the switch on Lipo Rider to 5v.
You have to cut slider switch mounting plates to fit that in socket.
You have to unsolder USB-A and JST 2.0 from Lipo Rider.
I was printing this with fuzzy skin billow and also with supports
