Wireless Charging Puck Adapter for Adjustable Phone Stand Qi2/Magsafe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the non-charging magsafe holder on this desktop phone stand with a fitted cup for a Qi2 charging puck
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This adapter converts the original non-charging phone holder on the linked adjustable desktop stand into a Qi2 magnetic charging mount.
The printed cup holds a standard Qi2 charging puck and includes a cable cutout. It attaches to the stand using the original pivot hardware, preserving the stand’s height and angle adjustment while allowing a compatible phone to magnetically attach and charge.
The pivot tab is the highest-stress area of the model, so it is reinforced with two 3 × 20 mm steel dowel pins. The pins are inserted into the provided holes to strengthen the layer lines and reduce the chance of the mounting tab breaking during adjustment or daily use.
Supports required, and my dowel pins required a fair amount of hammering to seat fully.
Required hardware
1 compatible Qi2 charging puck
2 × 3x20 mm steel dowel pins
Original stand pivot screw and hardware
Designed for this adjustable phone stand:https://a.co/d/03WUoQgW