Atari Gamestation Go D-Pad Joystick Add-On
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevate your retro game-play with this D-Pad enhancement. Simply attach D-Pad base with 3M-468MP transfer tape.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
M3X4 brass heat inserts are required for the D-Pad base and each respective topper.
Amazon: https://a.co/d/0ieGxbBw
M3X8 stainless flat tip set screws (used to connect base to topper)
Amazon: https://a.co/d/0fL6ZdHA
21mm OD 3M-468MP transfer tape is used to adhere to the Gamestation Go OEM D-Pad.
Amazon: https://a.co/d/0akZi8cW
Clean surfaces with isopropyl alcohol to remove any contaminates. Allow IPA to evaporate and attach the 3M transfer tape to the D-Pad Base. Press into the surfaces of the base.
Remove protective film and expose the adhesive and apply tot he Atari Gamestation GO D-Pad. Allow to cure for 24+ hours for maximum hold.
NOTE: For best results use 0.100mm layer height and have your 3D printer calibrated in to ensure dimensional accuracy.
Suggested Build Instructions:
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility)
https://atomicfilament.com/products/carbon-fiber-black-petg-pro
Other materials: PETG, ASA, ASA-CF, ABS, PLA
Nozzle: 0.40mm
Bed Temp: 75c
Hotend: 255c-260c
Extrusion Multiplier: 0.94
Layer Height: 0.10mm
Perimiters: 4
Infill: 25%, Cubic
Support: None