Tricopter conversion for ZMR 250
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This item is designed to allow converting a zmr250 style frame from a quadcopter into a tricopter. It includes a slot…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This item is designed to allow converting a zmr250 style frame from a quadcopter into a tricopter. It includes a slot for one 9-gram servo and a place to attach your motor.
Make sure to print all parts on their sides so the part that looks looks like a comb is flat on the table. This gives the maximum strength in the weak area where the hinge is.
I used MIG welding wire as the servo connecting rod and for the axle. A dab of hot glue holds the axle in and keeps the whole thing from falling apart. For attaching it to the frame, I used some plastite screws salvaged from an old NERF gun. 3mm machine screws might work but plastite is preferred so it grips the plastic better.
Category: R/C Vehicles