37 modeli
Hi everyone! This is my 3D printed Tricopter test platform for Ardupilot FPV setup. More about this project in my video: https://youtu.be/Mi7w18WuLz8 Parts used in this project: 1x Mateksys F405-SE Flight Controller 3x Emax RS2205 2300KV…
Designed Foldable Tricopter for Pixhawk flight controller with HD camera gimbal 20x20mm square CF tubes from Hobby King T-Motor 2216 800KV motors X PDI-2506MG 25g Metal Gear Micro Digital Servo for RC Helicopter from Banggood Top and…
Switchblade Tricopter. redesigned someone's idea on thingiverse This version uses 10mm CF tubes. I found out that parts printed out of HIPS are much lighter than PLA and PETG for example 60g part in PETG is only 49g in HIPS. Printing with…
It's finally here! See instructions for details. Many parts are optional. Early test flight: http://youtu.be/IVNpG9oJvUg I modified Thingiverse user ennui2342's tricopter body, based off of David Windestal RCExplorer tricopter, to support…
This is a Tricopter Y4 Drone that i have design. I will upload the M3 distance tube but i dont recommend to use them. I did just make them to show how the frame look like. Printer settings: Infill- 36% Grid pattern Perimeters- 4 Hight-…
infil: 20% perimeters:2 between rotors = 250mm motors: dys 1806-2300kv servo corona DS939HV ESC simonK12A atom mini CC3D proppelle: gemfan 5030 battery: 3S1000-1300mah. inspired: http://www.thingiverse.com/thing:526082 Print instructions…
A rear motor mount for a tricopter. Concept based on the RCExplorer tricopter motor mount using Hobbyking steerable landing gear mounts, but with better attachment and motor mount options. Can be bolted onto 10mm or 15mm wide booms…
more (Bi/Tri/V-Tail)copterparts (to come)... Servo dimensions: 22.5x11.5x24.6mm Category: R/C Vehicles
During Covid-19 my son and I enjoyed designing and building various Tricopters. The Whirlygig was our attempt at making the smallest Tricopter possible for outdoor use. All up weight being just over 54 Grams and acrobatic flight time of…
Small tricopter which I made flying some time ago from following components: FMU Crius AIOP 2 8A regulators 1806 2400KV brushless motors 6 inches propellers tail servo emax es08d LiPol 1,6AH, 3-cells Print instructions Category: R/C…
Printed in PLA with 2 shells, and ~10% infill at 215C (Slicer settings will need tweaking for optimal strength) Non-printed parts list (Some parts may be substituted): 8 M3 Nylon Nuts 4 M3x16mm Screws 3 Brotherhobby Returner R3 1106 3+…
Tricopter design Uses 1/2" wood spars, and assorted 3mm hardware. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: R/C Vehicles
After being unable to find a small tricopter (yet lots of small quads) I set out to make one. I designed this around the KK2 control board and Turnigy 1811 2900kv motors. Update: It looks like the KK2 Board is getting harder to find but…
Custom designed tilt mechanism for bicopter/tricopter. This is inspired by the design from rcexplorer.se and is direct drive. It was designed for the hexTronik DT750 motor and the Corona DS238 MG Servo with an M2.5x20mm socket head bolt…
The tail is a remix of the impossible tilt. I have revised it to fit the Tricopter LR better. I also strengthened the servo holder. This design uses 3mm IDx6mm ODx2.5mm deep ball bearings (2) in the back mount to reduce friction to a…
RCExplorer.se tricopter mounting base for flight controller Print instructions Category: R/C Vehicles Summary RCExplorer.se tricopter mounting base for flight controller
Fuer Tricopter mit 15mm x 15mm Stangen, als Heckgelenk geeignet. For Tricopter with 15mm x 15mm rods, suitable as a tail joint. (based on Tricopter RCExplorer.se http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/ ) Category: R/C…
Tricopter tail mechanism for 20mm Carbon Fiber tail boom. Requires 27x5mm metal pin for hinge. Included design for two 5x13 mm bearings. Added some modifications for 19.5mm or 1/2" square wooden dowels and 20mm CF tubes. 4-4-2018 -…
I grew tired of tie wraps breaking on even a slightly bounced landing with my rcexplorer tricopter. So I developed these flex legs for the tricopter. They will work with any 10mm square tube so these legs are not limited to the tricopter,…
Experimental Tricopter Concept: The Thrustvector (down and back) remains the same on the Yawaxis (This is the Difference to a standard Tricopter). In forward flight the Copter should fly level (selfrighting Pitchaxis). CG is more to the…
This is a remix of Prax's adjustable mobius mount for KipK's tricopter design (brocopter). It allows the angle the mobius camera to be adjust while still keeping it isolated from vibration. No modifications are needed to the brocopter.…
Motor Mount for Tricopter by Lucas Weakley. This replaces plywood disks used to mount motors. Note, print both to align wiring in symmetrical fashion. http://lucasweakley.com/product/maker-hangar-tricopter-kit/ Note, this design contains…
This part was originally included in the kit I sold, but I am posting it here for anyone who wants to build the tricopter today. Check out the video here:
In the beginning ... David Windestål graced the public with his wonderful tricopter designs. I was able to find a cache of some of his shared files before his store / website went offline. https://www.youtube.com/@DavidWindestal These…
These are the Printed parts that go to my tricopter V2.5. Instructions Follow the instructions in my build videos: Part 1: http://www.youtube.com/watch?v=i5Wpsr8MKOs Part 2: http://www.youtube.com/watch?v=1V0GqJk4iZo Part 3:…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/78rTPpdi7I Rear Landing gear for http://www.thingiverse.com/thing:755420 Category: 3D Printing
Built this for my home-built tricopter, inspired by David Windestahl's design (RC-Explorer) New update coming Aimed towards a modular design I'm working on setting up my printer first , as soon as I've a confirmed good print and flight…
This is a remix of a remix. This is an alternative tail design for the Mini FPV Tricopter, remixed off of the Alternative Tail for Tricopter. This design uses the BMS 22HV digital servo. It has all metal gears, high torque, is very fast…
The idea of a Tri-Copter is for more helicopter like flying and better yaw performance and this was what I was after (I already have a 200QX, see my other posting). I love flying this Copter. It flows through the air and is fast (if you…
simple main frame for Coreless Tricopter
This item is designed to allow converting a zmr250 style frame from a quadcopter into a tricopter. It includes a slot for one 9-gram servo and a place to attach your motor. Make sure to print all parts on their sides so the part that…
As all landing gears were designed for the 10mm carbon fiber or aluminium booms, I decided to modify this one to fit the 12mm wooden booms (initial design by sarky1) Height : 117mm Width : 50mm Thickness: 6mm This thing was modified with…
Rcexplorer Tricopter V4 TBS Unify Antenna mount Category: R/C Vehicles
Housing that can hold a GoPro HERO3/4 camera and a CCD camera side by side. The CCD camera body size is 30x30x11mm. How I Designed This Modeled with FreeCAD & Blender Category: R/C Vehicles
Rcexplorer TricopterV4 FPV Cam mount for standard RunCam Sky+ like cameras. Print this object twice to use it. Category: R/C Vehicles
Canopy for protecting the receiver and other components on top of the frame. Instructions Print using zero infill & use perimeter count to set the wall thickness to about 0.8mm. I printed the ceiling separately and blued it to the walls…
Tricopter Camera Vibration Dampening Mount. Using Piano Wire 1.5mm diameter. Also included plate for soft mount rubber dampeners used for flight controllers in combination with standoffs. This version is 10 grams lighter…
