1 / 3
TriCopter landing gear (12mm wooden boom)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As all landing gears were designed for the 10mm carbon fiber or aluminium booms, I decided to modify this one to fit…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
As all landing gears were designed for the 10mm carbon fiber or aluminium booms, I decided to modify this one to fit the 12mm wooden booms (initial design by sarky1)
Height : 117mm
Width : 50mm
Thickness: 6mm
This thing was modified with Tinkercad.
Edit it online https://www.tinkercad.com/things/lyXrnRdnftz
Tricopter Build video https://www.youtube.com/watch?v=kvZGA6dJQJs#t=50
All credits to David Windestål http://RCExplorer.se
Category: 3D Printing