Tricopter Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor Mount for Tricopter by Lucas Weakley. This replaces plywood disks used to mount motors. Note, print both to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Motor Mount for Tricopter by Lucas Weakley. This replaces plywood disks used to mount motors. Note, print both to align wiring in symmetrical fashion. http://lucasweakley.com/product/maker-hangar-tricopter-kit/
Note, this design contains a thin layer below top portion of mount. This is to ensure that shaft hole is able to print with FFF printer. After printing, drill out holes for shaft and mounting screws.
I've included the SCAD files if you would like to modify design to fit your "arm"
Instructions
Printed in PLA using 0.2 mm layer height and 50% in-fill. Less in-fill can be used to reduce weight.
Category: R/C Vehicles