Metric & Imperial Woodworking Layout Squares with Scribe Guides and Slide-On Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Durable open-center woodworking layout squares in 200 × 150 mm metric and 8 × 6 inch imperial versions, with scribe hole
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Included files
- Metric combined color-change STL
- Metric body-only and markings-only STLs
- Metric slide-on fence and fence fit-test STLs
- Imperial combined color-change STL
- Imperial body-only and markings-only STLs
- Imperial slide-on fence and fence fit-test STLs
- Source file, previews, print guide, and attribution
Print settings
Print the square flat with the markings up at 100% scale. Suggested starting
point: 0.20 mm fixed layer height, 4 walls, 5 top/bottom layers, and 25% gyroid
or cubic infill. No supports. PETG is preferred for workshop durability; PLA+
also works. The fence STL is already oriented for support-free printing; use
5 walls or 100% infill.
Single-extruder color change
The main body ends at Z = 6.0 mm and the raised markings end at Z = 6.4 mm. At
0.20 mm layer height, insert one color change immediately before the first layer
above 6.0 mm (nominally the Z = 6.2 mm marking layer). Finish in the second color;
no swap back is required. Confirm this in the slicer preview.
Important fit note
Print the matching fence fit test first. The nominal clearance is 0.25 mm per
face. If it is tight, lightly sand the inside of the fence or adjust horizontal
expansion for the fence only. Do not scale the ruler.
Bed-size note
The imperial square is about 219.2 mm wide. On a 220 mm bed, center it carefully,
disable skirt and brim, and verify the entire toolpath remains inside the actual
printable area.
Attribution
Remixed from “Right Angle/Square Measure Ruler (15cm*20cm)” by Tham TBM:
https://www.printables.com/model/629399
Licensed under CC BY-NC-SA 4.0.
