1 / 5
Metric & Imperial Woodworking Layout Squares with Scribe Guides and Slide-On Fence — image 1
1 / 5

Metric & Imperial Woodworking Layout Squares with Scribe Guides and Slide-On Fence

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Durable open-center woodworking layout squares in 200 × 150 mm metric and 8 × 6 inch imperial versions, with scribe hole

Rating
0 / 5
Likes
2
Downloads
14
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Included files

- Metric combined color-change STL

- Metric body-only and markings-only STLs

- Metric slide-on fence and fence fit-test STLs

- Imperial combined color-change STL

- Imperial body-only and markings-only STLs

- Imperial slide-on fence and fence fit-test STLs

- Source file, previews, print guide, and attribution

Print settings

Print the square flat with the markings up at 100% scale. Suggested starting

point: 0.20 mm fixed layer height, 4 walls, 5 top/bottom layers, and 25% gyroid

or cubic infill. No supports. PETG is preferred for workshop durability; PLA+

also works. The fence STL is already oriented for support-free printing; use

5 walls or 100% infill.

Single-extruder color change

The main body ends at Z = 6.0 mm and the raised markings end at Z = 6.4 mm. At

0.20 mm layer height, insert one color change immediately before the first layer

above 6.0 mm (nominally the Z = 6.2 mm marking layer). Finish in the second color;

no swap back is required. Confirm this in the slicer preview.

Important fit note

Print the matching fence fit test first. The nominal clearance is 0.25 mm per

face. If it is tight, lightly sand the inside of the fence or adjust horizontal

expansion for the fence only. Do not scale the ruler.

Bed-size note

The imperial square is about 219.2 mm wide. On a 220 mm bed, center it carefully,

disable skirt and brim, and verify the entire toolpath remains inside the actual

printable area.

Attribution

Remixed from “Right Angle/Square Measure Ruler (15cm*20cm)” by Tham TBM:

https://www.printables.com/model/629399

Licensed under CC BY-NC-SA 4.0.