DIY volute style brushless blower fan (BR2212 motor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this small but powerful air blower for fun. While I am sure there is a lot of room for improvement it works…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this small but powerful air blower for fun. While I am sure there is a lot of room for improvement it works quite well.
Don't pay too much attention to the print quality as this was printed on a very old printer.
The impeller is made of two parts that need to be glued together, everything else threads or slots together.
It uses A RaceStar BR2212 brushless motor (https://s.click.aliexpress.com/e/_c3ngfARN) secured in place with 4x M3 6mm long screws (these came with the motor). You also need a ESC to drive the motor (something like this https://s.click.aliexpress.com/e/_c3jw42pv) and either a microcontroller to send the signal to the ESC or a small servo tester (https://s.click.aliexpress.com/e/_c4V9murl). You will also need a battery for power.