Pool countercurrent plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jednoduchá zátka do potrubí (v mém případě protiproudu v bazénu) o prumeru 90mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed this plug to redo pool countercurrent pipes but could be used as preparation for winter - you don't need drain too much watter.
I tried to print the plug waterproof, but not succeeded (but still it is just a few drops) so I will not tell you any tips. If someone of you will succeed, tell us.
I tried to print it from pc/ABS because it is strong material and should survive salted watter (you can see how I fought with it🙂) and tpu 93.
I tried this printer settings for TPU (with 0,6mm nozzle):
Layer height: 0,30 mm
Perimeters: 3-4
Full layers top/bottom: 5/5
Top and bottom pattern: concentric
Infill: 20% giroid
Extrusion multiplier: 1,04
The water leakage un TPU part is probably there where the plate connects with "body"
Edit: uploaded pictures are from version 1, second version (and uploaded stl) has the TPU plug shorter, so it could fit the hole better.
Edit2: use stainless steel in salted water