Pool countercurrent plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jednoduchá zátka do potrubí (v mém případě protiproudu v bazénu) o prumeru 90mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I needed this plug to redo pool countercurrent pipes but could be used as preparation for winter - you don't need drain too much watter.
I tried to print the plug waterproof, but not succeeded (but still it is just a few drops) so I will not tell you any tips. If someone of you will succeed, tell us.
I tried to print it from pc/ABS because it is strong material and should survive salted watter (you can see how I fought with it🙂) and tpu 93.
I tried this printer settings for TPU (with 0,6mm nozzle):
Layer height: 0,30 mm
Perimeters: 3-4
Full layers top/bottom: 5/5
Top and bottom pattern: concentric
Infill: 20% giroid
Extrusion multiplier: 1,04
The water leakage un TPU part is probably there where the plate connects with "body"
Edit: uploaded pictures are from version 1, second version (and uploaded stl) has the TPU plug shorter, so it could fit the hole better.
Edit2: use stainless steel in salted water