DIY PET Bottle Ant Farm Core with Ant Head Cap (Educational 360° Formicarium)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
360° Educational Ant Farm insert for 2L PET bottles. Features a fun Ant Head top cap, built-in hydration system, and 100
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🐜 Upcycled PET Bottle Formicarium Core (Ant Head Edition)
Transform a standard 2L PET bottle into an interactive, 360-degree educational Ant Farm! This updated version features a fun, custom Ant Head Top Cap that serves as both a ventilation lid and an easy-access port for hydration, turning household plastic waste into a playful STEM science project for kids and biology lovers.
> 🤖 Design & Modeling Note:
> The entire functional formicarium core, hydration channels, and tolerances were precision-engineered in Autodesk Inventor. Generative AI was used exclusively to assist in sculpting the organic geometry of the decorative Ant Head Cap.
🌟 Features & Highlights
* Ant Head Top Cap: Decorative and functional cap designed to add character to your formicarium while protecting the hydration port.
* 360° Observation Chambers: Clear outer tunnels designed for optimal viewing of ant tunneling, queen activity, and colony growth.
* Easy Hydration System: Simply remove the Ant Head top cap to add water to the central hydration port via cotton/sponge using a dropper or syringe.
* Eco-Friendly STEM Project: Perfect for classrooms, homeschooling, and science fairs to learn about biology and recycling.
🖨 Print Profile & Plates Breakdown
* Plate 1 (Standard Kit): Formicarium Core
* Plate 2 (Special Edition Cap): Custom Ant Head Decorative Cap.
🛠 Quick Assembly Guide
1. Prepare Bottle: Clean a standard 2L PET bottle (Coca-Cola style) and carefully cut off the bottom section at the designated line.
2. Insert Core: Slide the 3D-printed core through the bottom.
3. Hydrate: Place a small piece of cotton inside the top hydration chamber and moisten with a few drops of water using a pipette or syringe.
4. Cap it off: Place the Ant Head Cap on top and observe your colony!
> ⚠ Tolerance & Scaling Note:
> Bottle wall thicknesses and PLA/PETG shrinkage can vary slightly. If the fit feels too loose or too tight on your specific bottle, try scaling the model by 99% to 101% in your slicer.
🎥 Video Assembly Guide & Project Story
Check out the full video showing the assembly and test with my 3-year-old daughter on YouTube:
Designed with Autodesk Inventor.
