1 / 1
X-shot Spinshot (BreakBarrel) BCAR barrel — zdjęcie 1

X-shot Spinshot (BreakBarrel) BCAR barrel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Boost FPS (by 10) and accuracy without lengthening the blaster.

Ocena
5 / 5
Polubienia
30
Pobrania
54
Wydruki
1
Wyświetlenia
921
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I know some mods can boost this blaster to much higher FPS (by swapping to a longer barrel), but I am not a fan of lengthening this already long blaster; I would like to keep it as is. So I made this to boost performance a bit while not making the blaster excessively long.

The BCAR setting is 3 bearings for the first row and 4 bearings for the second row. Using only 2 rows because the barrel length is needed to boost FPS. And the reason behind the weird 3+4 combination is that it simply won't fit 2 rows of 4 bearings. Nonetheless, I find it still gives better accuracy than the stock 3 x 4 roller SCAR; YMMV.

If possible, sand the inner barrel a bit to smooth out the layer line.

Hardware needed

M3 SHCS 8-10mm x 7

F683ZZ bearing x 7

Installation

To install, please refer to TaG's modding video; the procedure is basically the same, just that mine is a one-piece barrel.

Tagi