1 / 5
Measuring Cup for 2Stroke Oil, Messbecher 2Takt Öl (1:45/1:50) — zdjęcie 1
1 / 5

Measuring Cup for 2Stroke Oil, Messbecher 2Takt Öl (1:45/1:50)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Measuring cup for up to 8 liters of 2stroke Mix Petrol on the road Messbecher bis zu 8 Liter 2taktbenzin für unterwegs

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

-- ENGLISH --

Measuring cup for two-stroke oil for use on the go, with a 2% or 2.2% mixing ratio (equivalent to 1:50 or 1:45)
When refueling, fill the two-stroke oil up to the mark indicating the gasoline amount and add it. Ideal for two-stroke-powered two-wheelers such as mopeds, Vespas/scooters, Simson, etc.

The lid can be printed with a holder for a spare spark plug. It is securely screwed into the existing spark plug thread on the lid.:
M14 short-thread spark plugs (corresponds to NGK ...HS)
or M14 long-thread spark plugs (corresponds to NGK ...ES)

Additionally, a separate screw-on compartment for spare parts, such as jets, is available
Mounting brackets for securing with M5 screws or cable ties are also included

I printed the measuring cup in PETG (0.2 mm, 6 layers top/bottom and 5 wall passes). For better readability of the measuring cup, I recommend using a lighter-colored filament for readability.

A 50x3 (mm) O-ring can be used to seal the lid
A 30x3 (mm) O-ring can be used to seal the spare spark plug holder

-- DEUTSCH --

Messbecher für Zweitaktöl für unterwegs mit 2% oder 2.2% Mischverhältnis (Entspricht 1:50 bzw 1:45)
Beim Tanken das Zweitaktöl bis an den Steg mit Beschriftung der Benzinmenge auffüllen und beigeben. Ideal für zweitaktbetriebene Zweiräder wie Mofas, Vespa/Scooter, Simson etc.

Der Deckel kann mit einem Halter für eine Reservezündkerze gedruckt werden. Sie wird sicher verschraubt im vorhandenen Kerzengewinde am Deckel.
Zündkerzen M14 Kurzgewinde (entspricht NGK ...HS)
oder Zündkerzen M14 Langgewinde (entspricht NGK ...ES)

Zudem ist ein weiteres angeschraubtes Fach für Ersatzteile, zB für Düsen, erhältlich
Halterungen für die Befestigung mit M5 Schrauben oder mit Kabelbindern sind auch vorhanden

Ich habe den Messbecher in PETG gedruckt (0.2mm, 6 Schichten oben/unten und 5 Wandschleifen). Für die Leserlichkeit des Messbechers empfehle ich ein helleres Filament.

Zur Abdichtung des Deckels kann ein O-Ring 50x3 (mm) verwendet werden
Bei der Reservekerzenhalterung kann zur Abdichtung ein O-Ring 30x3 (mm) verwendet werden

Tagi