Tuni G3 Grinder 15° Angled Base / Incline Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print this Tuni G3 Grinder 15° Angled Base / Incline Stand for less grind retention.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Give your Tuni G3 64mm Flat Burr Coffee Grinder a 15° forward tilt to significantly reduce retention, speed up workflow, and achieve a sleek, angled profile on your coffee bar setup.
This custom-designed base aligns the grinder's chute straight into your portafilter or dosing cup, helping coffee grounds slide out naturally without static build-up or dead zones.
Key Features
15° Forward Tilt: Optimizes gravity flow down the burr chamber and chute, lowering retention and minimizing the need for heavy bellow tapping.
Perfect Fit Design: Custom recess footprint tailored specifically for the Tuni G3 base to prevent sliding or rocking during operation.
Low Profile & Stable: Wide base footprint ensures complete stability, even when pushing buttons on the LED touchscreen.
Upgradable: Holes added to the bottom for the addition of antiskid foot pads if so desired.
Recommended Print Settings
Setting | Recommended Value |
Material | PLA+, PETG, or ABS |
Layer Height | 0.28 mm |
Wall Loops | 2 - 3 walls (for structural rigidity) |
Infill Density | 30% |
Infill Pattern | Adaptive Cubic |
Supports | None required (prints flat on build plate) |
Brim | None required |