Tuni G3 Grinder 15° Angled Base / Incline Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print this Tuni G3 Grinder 15° Angled Base / Incline Stand for less grind retention.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Give your Tuni G3 64mm Flat Burr Coffee Grinder a 15° forward tilt to significantly reduce retention, speed up workflow, and achieve a sleek, angled profile on your coffee bar setup.
This custom-designed base aligns the grinder's chute straight into your portafilter or dosing cup, helping coffee grounds slide out naturally without static build-up or dead zones.
Key Features
15° Forward Tilt: Optimizes gravity flow down the burr chamber and chute, lowering retention and minimizing the need for heavy bellow tapping.
Perfect Fit Design: Custom recess footprint tailored specifically for the Tuni G3 base to prevent sliding or rocking during operation.
Low Profile & Stable: Wide base footprint ensures complete stability, even when pushing buttons on the LED touchscreen.
Upgradable: Holes added to the bottom for the addition of antiskid foot pads if so desired.
Recommended Print Settings
Setting | Recommended Value |
Material | PLA+, PETG, or ABS |
Layer Height | 0.28 mm |
Wall Loops | 2 - 3 walls (for structural rigidity) |
Infill Density | 30% |
Infill Pattern | Adaptive Cubic |
Supports | None required (prints flat on build plate) |
Brim | None required |
