1 / 4
Ceiling/Wall Bracket for 3/4" PVC (Garlic / Herb Curing Rack) — zdjęcie 1
1 / 4

Ceiling/Wall Bracket for 3/4" PVC (Garlic / Herb Curing Rack)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A heavy-duty, snap-fit bracket designed to suspend a standard 3/4" Schedule 40 PVC pipe.

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
A heavy-duty, snap-fit bracket designed to suspend a standard 3/4" Schedule 40 PVC pipe. Originally engineered to create a secure, high-airflow curing rack for hardneck garlic and herbs in a cramped utility room, this bracket is versatile enough for general storage, tool hanging, or spool management. 

The design features a 2-inch (50mm) drop clearance, providing plenty of room for hands, twine, or S-hooks, and includes a snap-fit opening so the pipe can be removed when not in season. 

**Bonus:** The flat T-flange design allows it to be mounted vertically from ceiling joists or horizontally across wall studs.

## Features
*   **Perfect Snap-Fit:** Tailored exactly for 26.7mm OD (3/4" Schedule 40 PVC).
*   **Ample Clearance:** Standoff arm drops the pipe down for easy access.
*   **Multi-Mount:** Works as a ceiling drop or a wall-mounted standoff.
*   **Anti-Slide Pinning:** Includes a 3mm set-screw hole in the center bracket to physically pin the PVC and prevent it from sliding horizontally.

## Hardware Required
*   **Pipe:** 3/4" Schedule 40 PVC Pipe (Outer Diameter: 1.050" / 26.7mm)
*   **Mounting:** 2-inch wood or deck screws (must anchor into studs or ceiling joists—do not rely solely on drywall anchors for heavy dynamic loads).
*   **Pinning (Optional but recommended):** 1x small pan-head screw (e.g., 1/2-inch) to use as a set screw in the center bracket.

## Recommended Print Settings
To ensure the infrastructure can safely support a heavy harvest without sagging or snapping over time, follow these structural settings:
*   **Material:** PETG (Recommended for its slight flexibility for the snap-fit and resistance to ambient heat). 
*   **Orientation:** Print laying perfectly flat on its back (T-shape flat on the build plate). *Do not print standing up.* 
*   **Walls/Perimeters:** 4 to 6 walls. (Outer shell thickness provides the real strength, not just infill).
*   **Infill:** 40% - 50% Gyroid.
*   **Layer Height:** 0.20mm (Provides a smooth inner curve for the snap-fit).
*   **Supports:** None required.

## Assembly Notes
If running a long span (e.g., 8 feet), print three brackets total. Use the standard brackets for the outer ends, and the "Center Bracket" (with the set-screw hole) in the middle. Mount all three to your joists/studs, snap the PVC in, and drive one small screw through the center bracket's set-screw hole directly into the PVC to lock the lateral movement.

## Remixing & Source Files
The original Tinkercad geometry is open for modification! If you need to adapt this for 1/2" PEX, copper piping, or a larger 1" wooden dowel, feel free to grab the source file and adjust the tolerances.

https://www.tinkercad.com/things/8SHVrAuvE7V-bracket-for-34-pvc?sharecode=KALCIdvNa0Q993BNB_uDSocmhbnO9xfKjnhzWdnBMuM