1 / 4
Ceiling/Wall Bracket for 3/4" PVC (Garlic / Herb Curing Rack)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A heavy-duty, snap-fit bracket designed to suspend a standard 3/4" Schedule 40 PVC pipe.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A heavy-duty, snap-fit bracket designed to suspend a standard 3/4" Schedule 40 PVC pipe. Originally engineered to create a secure, high-airflow curing rack for hardneck garlic and herbs in a cramped utility room, this bracket is versatile enough for general storage, tool hanging, or spool management.
The design features a 2-inch (50mm) drop clearance, providing plenty of room for hands, twine, or S-hooks, and includes a snap-fit opening so the pipe can be removed when not in season.
**Bonus:** The flat T-flange design allows it to be mounted vertically from ceiling joists or horizontally across wall studs.
## Features
* **Perfect Snap-Fit:** Tailored exactly for 26.7mm OD (3/4" Schedule 40 PVC).
* **Ample Clearance:** Standoff arm drops the pipe down for easy access.
* **Multi-Mount:** Works as a ceiling drop or a wall-mounted standoff.
* **Anti-Slide Pinning:** Includes a 3mm set-screw hole in the center bracket to physically pin the PVC and prevent it from sliding horizontally.
## Hardware Required
* **Pipe:** 3/4" Schedule 40 PVC Pipe (Outer Diameter: 1.050" / 26.7mm)
* **Mounting:** 2-inch wood or deck screws (must anchor into studs or ceiling joists—do not rely solely on drywall anchors for heavy dynamic loads).
* **Pinning (Optional but recommended):** 1x small pan-head screw (e.g., 1/2-inch) to use as a set screw in the center bracket.
## Recommended Print Settings
To ensure the infrastructure can safely support a heavy harvest without sagging or snapping over time, follow these structural settings:
* **Material:** PETG (Recommended for its slight flexibility for the snap-fit and resistance to ambient heat).
* **Orientation:** Print laying perfectly flat on its back (T-shape flat on the build plate). *Do not print standing up.*
* **Walls/Perimeters:** 4 to 6 walls. (Outer shell thickness provides the real strength, not just infill).
* **Infill:** 40% - 50% Gyroid.
* **Layer Height:** 0.20mm (Provides a smooth inner curve for the snap-fit).
* **Supports:** None required.
## Assembly Notes
If running a long span (e.g., 8 feet), print three brackets total. Use the standard brackets for the outer ends, and the "Center Bracket" (with the set-screw hole) in the middle. Mount all three to your joists/studs, snap the PVC in, and drive one small screw through the center bracket's set-screw hole directly into the PVC to lock the lateral movement.
## Remixing & Source Files
The original Tinkercad geometry is open for modification! If you need to adapt this for 1/2" PEX, copper piping, or a larger 1" wooden dowel, feel free to grab the source file and adjust the tolerances.
https://www.tinkercad.com/things/8SHVrAuvE7V-bracket-for-34-pvc?sharecode=KALCIdvNa0Q993BNB_uDSocmhbnO9xfKjnhzWdnBMuM