Double INBXX Middle Trim Dove Tail version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split the middle piece to make it easier to print
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Dovetail version
Uses the same end piece from the original.
The middle piece is dove tailed in the middle and secured together with a decorative piece and screw. It's still held in place by one screw, but due to being cut in the middle, the ends are not as secure but still holds end pieces in place.
Same instructions as original, except take care not to break the dove tail center. It helps to work the screw into the holes once before assembly. Put together the left middle piece and decorative piece with the screw first (see pictures), then attach the right middle piece. Back out the screw a little bit, and thread the T-Nut in most of the way before attaching to INBXX. It's trickier to attach than the original, but make sure the T-Nut is engaging before fully tightening the screw.