Marble Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Top Design This design uses a marble as the point. Any glass marble or steel ball (15 mm - 17.5 mm) will work.…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another Top Design
This design uses a marble as the point. Any glass marble or steel ball (15 mm - 17.5 mm) will work. If your marble/ball is too lose just put paper or craft foam between the marble/ball and the stem (I had to use a piece of paper).
Designed using Fusion360.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Notes:
Printed on my Anet A8, using .2 mm layer height, 20% infill, 3 perimeters, 3 top layers, and 3 bottom layers.
Stem took 68 min to print (30mm x 20mm & 3.5g PLA)Top took 3 hr 16 min to print (120mm x 19.25mm with marble (21mm without) & 31.5g PLA)
Category: Toy & Game Accessories