1 / 5
Marble Top — image 1
1 / 5

Marble Top

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Another Top Design This design uses a marble as the point. Any glass marble or steel ball (15 mm - 17.5 mm) will work.…

Rating
5 / 5
Likes
12
Downloads
99
Makes
1
Views
573
Reviews
1

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Another Top Design

This design uses a marble as the point. Any glass marble or steel ball (15 mm - 17.5 mm) will work. If your marble/ball is too lose just put paper or craft foam between the marble/ball and the stem (I had to use a piece of paper).

Designed using Fusion360.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20


Notes:

Printed on my Anet A8, using .2 mm layer height, 20% infill, 3 perimeters, 3 top layers, and 3 bottom layers.

Stem took 68 min to print (30mm x 20mm & 3.5g PLA)

Top took 3 hr 16 min to print (120mm x 19.25mm with marble (21mm without) & 31.5g PLA)

Category: Toy & Game Accessories

Tags