Mini 10-Tooth Cycloidal Gear Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile, recreated from the original part using caliper measurements and reference photos.
Specifications
10 rounded (cycloidal) lobes
Outside diameter: 8.7 mm
Thickness: 5.2 mm
Center bore: 3.5 mm (designed for a 3.6 mm press-fit metal bushing)
Parametric OpenSCAD source included
Printing Recommendations
Layer height: 0.08–0.12 mm
100% infill
4–6 walls
Print with the flattest face on the build plate
Recommended materials:
Nylon (PA12/PA-CF) ⭐ Best
PETG
ABS / ASA
Notes
This model was reverse-engineered from measurements and photographs. Since the original gear uses a rounded cycloidal tooth profile rather than a standard involute gear, minor adjustments may be required depending on printer tolerances and the mating gear.