LayersFactory
Report model
1 / 5
Mini 10-Tooth Cycloidal Gear Replacement — image 1
1 / 5

Mini 10-Tooth Cycloidal Gear Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.08 – €0.10 net (excluding VAT)

For file: 10_lobe_flower_gear_8.7mm_pressfit_3.5mm_0.15mm_PLA_MK3S_6m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.09 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
6 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

idona

idona

@idona_495159

This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Accessories
License
Creative Commons — Attribution — Noncommercial — NoDerivatives
DetailsFiles (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (0)Related

This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile, recreated from the original part using caliper measurements and reference photos.

Specifications

  • 10 rounded (cycloidal) lobes

  • Outside diameter: 8.7 mm

  • Thickness: 5.2 mm

  • Center bore: 3.5 mm (designed for a 3.6 mm press-fit metal bushing)

  • Parametric OpenSCAD source included

Printing Recommendations

  • Layer height: 0.08–0.12 mm

  • 100% infill

  • 4–6 walls

  • Print with the flattest face on the build plate

  • Recommended materials:

    • Nylon (PA12/PA-CF) ⭐ Best

    • PETG

    • ABS / ASA

Notes

This model was reverse-engineered from measurements and photographs. Since the original gear uses a rounded cycloidal tooth profile rather than a standard involute gear, minor adjustments may be required depending on printer tolerances and the mating gear.

Tags

geargears