1 / 7
Anbernic RG40XX H Stand (3 Variants) — zdjęcie 1
1 / 7

Anbernic RG40XX H Stand (3 Variants)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple stand for the Anbernic RG40XX H

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Anbernic RG40XX H Stand

Simple desktop stand for the Anbernic RG40XX H.

  • Slightly tilted back surface for better stability and display.

  • Small positioning nub that uses the 3.5 mm headphone jack to keep the console centered in the stand.

  • No supports required.

  • Designed for a 0.4 mm nozzle and 0.2 mm layer height.

Available versions

  • Blank base (no text)

  • Separate letters – ANBERNIC

  • Multicolor – ANBERNIC

  • Separate letters – RG40XXH

  • Multicolor – RG40XXH

Which version should I choose?

Use the table below to download the files that match your printer setup.

No text

Separated printing ANBERNIC

Separated printing RG40XXH

Multicolor ANBERNIC

Multicolor RG40XXH

Stand_no_text.stl

Stand_with_text_ANBERNIC.stl

Stand_with_text_RG40XXH.stl

Stand_multicolor_ANBERNIC.3mf

Stand_multicolor_RG40XXH.3mf

or

Stand_inserts_ANBERNIC.stl

Stand_inserts_RG40XXH.stl

Stand_no_text.3mf

or

or

Stand_with_text_ANBERNIC.3mf

Stand_with_text_RG40XXH.3mf

Stand_inserts_ANBERNIC.3mf

Stand_inserts_RG40XXH.3mf

  • .STL – standard files, you probably already know what to do with them 🙂

  • Separated-printing .3mf – QIDI Studio project files with my orientation and basic PLA settings. They can be imported into other slicers, but some settings may not transfer correctly.
    The separate letters were modeled with 0.1 mm clearance. Depending on your printer calibration, some letters may fit tighter or looser; a tiny drop of glue works perfectly if needed.

  • Multicolor .3mf – generic pre-colored multi-body files that can be opened in most slicers.
    I don't own a multicolor printer, so these files only contain the geometry and color assignments. AMS/MMU-specific settings are not included, so you will need to configure the multicolor printing settings for your own printer and slicer.


Result in the pictures

(photos of the printed stand and the console inserted)

Printing information

Printed on: QIDI Q2
Slicer: QIDI Studio
Profile: Generic PLA

Materials used

  • Black PLA Bamboo

  • White PLA Bamboo

Print time & filament

  • Base: ~50 min, ~26 g

  • Text: ~7 min, ~1 g

Custom text reminder

If you want to create your own text for the separate-letter version, simply cutting the text in a slicer and printing it separately will not give a proper fit.

The insert letters need a small CAD offset (clearance / equidistant) to compensate for printer tolerances and allow the letters to fit into the recessed pockets.



This is my first fully self-designed 3D model, so I hope it will be useful for other RG40XX H owners. Feedback and remixes are welcome!

Tagi