Anbernic RG40XX H Stand (3 Variants)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple stand for the Anbernic RG40XX H
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Anbernic RG40XX H Stand
Simple desktop stand for the Anbernic RG40XX H.
Slightly tilted back surface for better stability and display.
Small positioning nub that uses the 3.5 mm headphone jack to keep the console centered in the stand.
No supports required.
Designed for a 0.4 mm nozzle and 0.2 mm layer height.
Available versions
Blank base (no text)
Separate letters – ANBERNIC
Multicolor – ANBERNIC
Separate letters – RG40XXH
Multicolor – RG40XXH
Which version should I choose?
Use the table below to download the files that match your printer setup.
No text | Separated printing ANBERNIC | Separated printing RG40XXH | Multicolor ANBERNIC | Multicolor RG40XXH |
|---|---|---|---|---|
Stand_no_text.stl | Stand_with_text_ANBERNIC.stl | Stand_with_text_RG40XXH.stl | Stand_multicolor_ANBERNIC.3mf | Stand_multicolor_RG40XXH.3mf |
or | Stand_inserts_ANBERNIC.stl | Stand_inserts_RG40XXH.stl | ||
Stand_no_text.3mf | or | or | ||
Stand_with_text_ANBERNIC.3mf | Stand_with_text_RG40XXH.3mf | |||
Stand_inserts_ANBERNIC.3mf | Stand_inserts_RG40XXH.3mf |
.STL – standard files, you probably already know what to do with them 🙂
Separated-printing .3mf – QIDI Studio project files with my orientation and basic PLA settings. They can be imported into other slicers, but some settings may not transfer correctly.
The separate letters were modeled with 0.1 mm clearance. Depending on your printer calibration, some letters may fit tighter or looser; a tiny drop of glue works perfectly if needed.Multicolor .3mf – generic pre-colored multi-body files that can be opened in most slicers.
I don't own a multicolor printer, so these files only contain the geometry and color assignments. AMS/MMU-specific settings are not included, so you will need to configure the multicolor printing settings for your own printer and slicer.
Result in the pictures
(photos of the printed stand and the console inserted)
Printing information
Printed on: QIDI Q2
Slicer: QIDI Studio
Profile: Generic PLA
Materials used
Black PLA Bamboo
White PLA Bamboo
Print time & filament
Base: ~50 min, ~26 g
Text: ~7 min, ~1 g
Custom text reminder
If you want to create your own text for the separate-letter version, simply cutting the text in a slicer and printing it separately will not give a proper fit.
The insert letters need a small CAD offset (clearance / equidistant) to compensate for printer tolerances and allow the letters to fit into the recessed pockets.
This is my first fully self-designed 3D model, so I hope it will be useful for other RG40XX H owners. Feedback and remixes are welcome!
